Hydraulic Deck Cranes


Click to Zoom
on all images

Knuckle Boom Crane
Taipan-05.jpg (5794 bytes)
EZ-3000-FB
Hydraulic Deck Crane
(Burger Boat Company)

Taipan-05.jpg (5794 bytes)
Taipan-05.jpg (5794 bytes)

EZ-3000-FB
Hydraulic Deck Crane
(Burger Boat Company)


Taipan-05.jpg (5794 bytes)
Taipan-05.jpg (5794 bytes)

EZ-3000-FB & EZ-4000-FB
(Feadship & Delta Marine)


Taipan-05.jpg (5794 bytes)

EZ-3500 FB
Hydraulic Deck Crane
mounted on a telescoping standpipe
(Gallant Lady - Delta Marine)


Knuckle Boom Crane

EZ-4000-FB
76' Northern Marine

Mono-Boom Type Crane System

For over a decade the EZ-Systems Hydraulic Deck Crane has proven to be the highest state-of-the-art yacht crane technology in an aesthetically pleasing design. The EZ-Systems hydraulic deck crane is available in lifting capacities of up to ten-thousand pounds, and in working boom lengths starting at twelve-feet. Any of these cranes may be special-ordered built to MCA Mega Yacht Code compliance.

This page describes our smaller cranes with lifting capacities of up to 5000 pounds. The EZ-Systems Crane’s long-tapered aluminum boom is capable of being loaded to its full safe working load capacity in any position without restriction. The intelligent engineering inherent in this design allows distributed load-deflection across the boom during moments of dynamic loading, reducing the amount of shock-loading transmitted to the deck.

Virtually silent-operating, our Hydraulic Linear Winch system, a totally non-fouling winch design reflects the innovative and dependably safe operating characteristics built into this crane. The EZ-Systems crane features 360º hydraulic power rotation providing the ultimate in tender-handling convenience. The crane is remotely operated with a joy-stick operated proportional control on a removable pendant. Optionally, a wireless proportional control may be provided. A pedestal base is the typical mounting structure for the EZ-Systems crane, although a floating-flange standpipe mount may also be used in some applications. The EZ-Systems Crane is powered by a hydraulic power unit, available in various horsepower configurations.

The EZ-Systems crane is finished to our highest standards. The aluminum structure is chromated and then primed with a two-part epoxy primer. Then the system is faired smooth, and then primed again. The crane is hand sanded, then moved into our heated finish booth where it is coated with a two-part
AwlGRIP urethane spray-applied paint finish in a color of white to match your vessel. The crane system is assembled and installed onto one of our three dynamic load-testing centers where our quality assurance team load tests and inspects every crane we produce prior to delivery to the customer.

Features:

  • Hydraulic Linear Winch cable-handling
    technology in all cranes.
  • Mega Yacht Code compliant
    (MCA full classification available)
  • 50,000 Ft/Lb, 80,000 Ft/Lb, 100,000 Ft/Lb 150,000 Ft/Lp, 200,000 Ft/Lb & 250,000 Ft/Lb Moment capacities. Up to 10,000 pound lift capacity.