| Euro
Davit System
Nautical
Structures’ EURO-1200-2 and EURO-1700-2
Hydraulic Davit Systems represent the current
state of the art in hydraulic yacht davit systems.
Compare the features of this davit against any
other and you will find the performance and
value of this equipment unsurpassed.
The
davit features a generous ten-and-a-half foot-long
boom that is capable of being fully loaded to
its full safe working load capacity in any position
without restriction. The enhanced lifting capacity
is more than adequate to safely handle the newest
four-stroke personal watercrafts. With operational
safety being our prime focus, the EURO-Systems
davit features our silent operating Hydraulic
Linear Winch system, a totally non-fouling winch
design.
The
hydraulic davit is powered by an integral one-horsepower
hydraulic power unit. Aluminum hydraulic cylinders,
standard in all EURO-Systems davits actuate
each function with unsurpassed corrosion resistance,
power and dependability. The EURO-Systems Davit
rotates easily by hand on steel bearings. Hydraulic
power rotation may be selected as an optional
feature to enhance the davit‘s operating
convenience. A through-deck standpipe is the
typical mounting structure for the EURO-Systems
Davit, although a pedestal base mount may also
be used in some applications.
The
EURO Davit System is finished to our very highest
standards. The aluminum structure is chromated
and then primed with a two-part epoxy primer.
Then the system is faired, and then primed again.
The davit is hand sanded, and then moved into
our heated finish booth where it is coated with
a two-part AwlGRIP urethane spray-applied paint
finish in a color of white to match your vessel.
The davit system is assembled and then moved
onto our dynamic load-testing center where our
quality assurance department load tests every
davit we produce prior to delivery to the customer.
|
